Synthesis of chromene derivatives in the presence of mordenite zeolite/MIL‐101 (Cr) metal–organic framework composite as catalyst

In the present study, the synthesis of mordenite zeolite/MIL‐101(Cr) metal–organic framework (MOF) composite [MOR/MIL‐101(Cr)] using the ship in a bottle method was suggested. The properties of prepared composite and individual MOF and MOR zeolite were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption measurement, and thermogravimetric analysis (TGA). The XRD results indicated diffraction peaks for each compound (MOR and MOF) in composite. The SEM and TEM images showed the formation of plates MOR (with size of 2.5 × 3 μm) along with spherical particles MIL‐101. The Brunauer–Emmett–Teller results showed that the surface area of the composite was smaller than individual MOF and MOR zeolite. Based on TGA plots, the hybrid zeolite/MOF composite was more thermally stable compared with the isolated MIL‐101(Cr). The composite was functionalized by post‐synthetic modification to obtain acid–base bifunctionality (H‐MOR/MIL‐101‐ED) for the synthesis of chromene derivatives. The acidity from framework Al‐O(H)‐Si sites in MOR and basicity from amine groups in MIL‐101 were obtained by post‐synthetic modification.     

Ultrasound assisted synthesis of amide functionalized metal-organic framework for nitroaromatic sensing

Nano plates of zinc(II) based metal-organic framework (MOF) were prepared via ultrasonic method without any surfactants at room temperature and atmospheric pressure. Control of particle size and morphology was enhanced in this synthesis method. Nano plates of an interpenetrated amide-functionalized metal-organic framework, [Zn₂(oba)₂(bpfb)]·(DMF)₅, TMU-23, (H₂oba = 4,4′-oxybis(benzoic acid); bpfb = N,N′-bis-(4-pyridylformamide)-1,4-benzenediamine, DMF = N,N-dimethyl formamide), was synthesized under ultrasound irradiation in different concentrations of initial precursor. The nano structure and morphology of the synthesized MOF were characterized by Field Emission Scanning Electron Microscopy (FE-SEM), powder X-ray diffraction, thermo gravimetric analysis (TGA), elemental analysis and FTIR spectroscopy. Moreover, Fluorescence emissions of nanoplates have been studied. Amide-functionalized MOF shows high selectivity for sensing of nitroaromatic compounds such as nitrophenol, nitroaniline, and nitrobenzene in acetonitrile solution. Fluorescence intensity decreased with increasing contents of nitroaromatics in acetonitrile solution due to fluorescence quenching effect.     

Preparation of BiVO4/MIL‐125(Ti) composite with enhanced visible‐light photocatalytic activity for dye degradation

Because of their desired features, including very specific surface areas and designable framework architecture together with their possibility to be functionalized, Metal Framework (MOF) is a promising platform for supporting varied materials in respect of catalytic applications in water treatment. In this work, a novel visible‐light‐responsive photocatalyst that comprised BiVO₄ together with MIL‐125(Ti), was synthesized by a two‐step hydrothermal approach. The characterization of as‐obtained samples as performed by X‐ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, Fourier transform infrared spectroscope, X‐ray photoelectron spectroscopy and ultraviolet‐visible diffuse reflection spectra. Rhodamine B was selected being a target for the evaluation of the photocatalytic function of as‐developed photocatalyst. The photocatalytic reaction parameters, for example, the content of BiVO₄ as well as initial concentration of Rhodamine B was researched. The composite photocatalyst possessing Bi:Ti molar ratio of 3:2 brought to light the fact that the greatest photocatalytic activity had the ability to degrade 92% of Rhodamine B in 180 min. In addition to that, the BiVO₄/MIL‐125(Ti) composite could keep its photocatalytic activity during the recycling test. The phenomenon of disintegration of the photo‐generated charges in the BiVO₄/MIL‐125(Ti) composite was brought to discussion as well.     

A 3D Luminescent Metal‐organic Framework Constructed from Cu4I4 Cubane Clusters and Triangular Imidazole Ligand

Abstract . The solvothermal reaction between cuprous iodide and the rigid triangular imidazole ligand in mixed N,N′‐dimethylacetamide (DMA)‐acetonitrile solvent leads to the isolation of the 3D metal‐organic framework [(Cu₄I₄)₃(TIPA)₄] · 7DMA ( 1 ) [TIPA = tri(4‐imidazolylphenyl) amine], which was characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. Topologically, the structure of 1 is an unprecedented 3,3,4,4‐connected net with a point symbol of {4.8.10}₂{4.8²}₂{4².8².10²}₂{8⁴.12²}. Compound 1 exhibits orange‐red photoluminescence with an emission maximum at 622 nm at room temperature.     

JACOB: An enterprise framework for computational chemistry

Here, we present just a collection of beans (JACOB): an integrated batch‐based framework designed for the rapid development of computational chemistry applications. The framework expedites developer productivity by handling the generic infrastructure tier, and can be easily extended by user‐specific scientific code. Paradigms from enterprise software engineering were rigorously applied to create a scalable, testable, secure, and robust framework. A centralized web application is used to configure and control the operation of the framework. The application‐programming interface provides a set of generic tools for processing large‐scale noninteractive jobs (e.g., systematic studies), or for coordinating systems integration (e.g., complex workflows). The code for the JACOB framework is open sourced and is available at: www.wallerlab.org/jacob . © 2013 Wiley Periodicals, Inc.     

Efficient removal of crystal violet and methylene blue from wastewater by ultrasound nanoparticles Cu-MOF in comparison with mechanosynthesis method

The present investigation reports the synthesis of CuBTC (BTC = 1,3,5-benzenetricarboxylate) metal–organic frameworks (MOFs) under solid-state conditions and ultrasound irradiation. Herein, we study uptake and release properties of crystal violet (CV) and methylene blue (MB) from ultrasound nano-CuBTC MOF in comparison with mechanosynthesis method (bulk structure). The ultrasound-assisted methods give a decrease in the surface area as calculated from the reduced nitrogen adsorption capability. In comparison, the uptake of guest molecules on ultrasound nano-CuBTC is remarkable and clearly exceeds that of bulk structure in the aqueous solution of guests. In bulk compound the channel length is increased so that the amount of adsorption is decreased a little. The small guest enters and leaves the cavity rapidly, whereas larger guests enter slowly due to their size relative to the size of the gaps in the capsule. As a result, the uptake and release of MB from CuBTC is faster than that of CV.     

From Distinct Metallopeptoids to Self-Assembled Supramolecular Architectures

The construction of synthetic protein mimics is a central goal in chemistry. A known approach for achieving this goal is the self-assembly of synthetic biomimetic sequences into supramolecular structures. Obtaining different 3D structures via a simple sequence modification, however, is still challenging. Herein we present the design and synthesis of biomimetic architectures, via the self-assembly of distinct copper-peptoid duplexes. We demonstrate that changing only one non-coordinating side-chain within the peptoids—sequence-specific N-substituted glycine oligomers—leads to different supramolecular structures. Four peptoid trimers incorporating 2,2’-bipyridine and pyridine ligands, and a non-coordinating but rather a structure-directed bulky group were synthesized, and their solutions were treated with Cu²⁺ in a 1:1 ratio. Single-crystal X-ray analysis of the products revealed the self-assembly of each peptoid into a metallopeptoid duplex, followed by the self-assembly of multiple duplexes and their packing into a three-dimensional supramolecular architecture via hydrogen bonding and π–π interactions. Tuning the non-coordinating side-chain enables to regulate both the final structure being either a tightly packed helical rod or a nano-channel, and the pore width of the nano-channels. Importantly, all the metallopeptoids structures are stable in aqueous solution as verified by cryo-TEM measurements and supported by UV/Vis and EPR spectroscopies and by ESI-MS analysis. Thus, we could also demonstrate the selective recognition abilities of the nano-channels towards glycerol.     

A Porphyrin-Based Covalent Organic Framework for Metal-Free Photocatalytic Aerobic Oxidative Coupling of Amines

Imines are important intermediates in drug synthesis. Photocatalytic aerobic oxidative coupling of amines has been considered as a clean and promising way to produce imines and has attracted great attention. Herein, we designed and synthesized a novel two-dimensional porphyrin-based covalent organic framework (Por-BC-COF) which adopts an AA stacking mode with excellent crystallinity, high Brunauer–Emmett–Teller surface areas (1200 m² g⁻¹), wide light absorption range (200–1300 nm) and good stability in a variety of organic solvents. Por-BC-COF can be used as a metal-free heterogeneous photocatalyst for the photocatalytic oxidation of amines to imines under visible light and red light with a high yield (97 %). This work presents a novel and efficient COF photocatalyst in the application of light-driven organic synthesis.     

A thermodynamic framework to model thixotropic materials

Thixotropic materials are widely used in a variety of industrial applications. The constitutive relations to describe these materials are based on one-dimensional experiments in which the material is subjected to a shear motion and there is no unique methodology to obtain proper three-dimensional models. The path towards generalization to a three-dimensional framework is invariably carried out in a ad hoc manner. Here we propose a three-dimensional model that stems from a general thermodynamic framework that has proved to be quite robust in the development of constitutive relations, namely the application of the second law of thermodynamics together with the maximization of the entropy production. This leads to a constitutive equation that has the same form of a generalized Upper Convected Maxwell equation, if we require that changes of microstructure due to the deformation of each Maxwell element that comprises the model are reversible. Changes in microstructure are governed by a potential that is a measure of the difference between the current structure and the equilibrium structure associated with it. The equilibrium structure associated with the current structure is determined by the current value of stress, considered the main break up agent. We assume that the state of equilibrium would be achieved in a Motion With Constant Stress History, starting from the current stress state, until a steady state where the kinematics is not changing.